Average Reviews:
(More customer reviews)I was reluctant to apply my limited do-it-yourself experience to suspending a $1500 TV from a wall. But I got a quick shot of courage by going to Circuit City and Best Buy and being quoted "starting at" $400 and $500 just for installation labor. I bought this mount, worked slowly and patiently, and had the flat-panel on the wall within an hour. It's really quite simple.
The most important thing is to precisely establish the location of the stud to which you want to attach the mount. I used an electronic stud-finder, and then confirmed the width of the stud by repeatedly hammering a thin nail into the wall. The mount comes with three huge "lag bolts" that need to be screwed into the center of the stud.
All went smoothly except that my light-duty drill couldn't drive the bolts, so I resorted to a socket wrench. After that it was a simple matter to place the part of the bracket that I had attached to the TV onto the wall mount.
I was surprised at the lack of standardization of attachment points on TVs, but the mount should work with most models.
I would suggest the following:
1. Something -- a powerful drill or a socket wrench -- that can drive the lag bolts. The bolt-heads are half-inch.
3. A 3/16th inch drill bit to pre-drill a hole for the lag bolts to enter (if you are attaching to a stud).
2. A long, thin nail and hammer.
3. A level.
4. A stud-finder
Even if your mechanical skills are primitive you should be able to satisfactorily install this mount. Be sure to get someone to help you lift the TV onto the mount. A "professional" installation of $400-$500 is preposterous since an experienced installer should be able to do the job in less than a half-hour.
The manufacturer's instructions are adequate if uninspired. For this kind of job you would hope for super-clear pictures and directions with no room for misunderstanding, but these are not quite up to that level. The manufacturer could put much clearer pictures -- actual photos -- on a web site. But the instructions were not a great impediment to completing the job.
Remember, the major issue is to locate the center of the stud and place the bolts there. And make sure you do a precise job of checking the mount's level. Do those things and you can save a cool $500 dollars to spend on a new receiver.
By the way, I'm glad I spent a bit more for an adjustable tilt mount instead of mounting the TV flush to the wall.
Click Here to see more reviews about: Sanus System VM200S TV Wall Mount (Silver)
Providing a balance of solid construction and ease of use, the Sanus VisionMount flat panel TV wall mount is ideal for use with virtually any 15-42" inch flat panel TV. Installation is quick & easy and adjusting the tilt and angle of your display is fingertip simple.
Buy cheap Sanus System VM200S TV Wall Mount (Silver) now.
No comments:
Post a Comment