Sanus System VM200S TV Wall Mount (Silver) Review

Average Reviews:

(More customer reviews)I was reluctant to apply my limited do-it-yourself experience to suspending a $1500 TV from a wall. But I got a quick shot of courage by going to Circuit City and Best Buy and being quoted "starting at" $400 and $500 just for installation labor. I bought this mount, worked slowly and patiently, and had the flat-panel on the wall within an hour. It's really quite simple.
The most important thing is to precisely establish the location of the stud to which you want to attach the mount. I used an electronic stud-finder, and then confirmed the width of the stud by repeatedly hammering a thin nail into the wall. The mount comes with three huge "lag bolts" that need to be screwed into the center of the stud.
All went smoothly except that my light-duty drill couldn't drive the bolts, so I resorted to a socket wrench. After that it was a simple matter to place the part of the bracket that I had attached to the TV onto the wall mount.
I was surprised at the lack of standardization of attachment points on TVs, but the mount should work with most models.
I would suggest the following:
1. Something -- a powerful drill or a socket wrench -- that can drive the lag bolts. The bolt-heads are half-inch.
3. A 3/16th inch drill bit to pre-drill a hole for the lag bolts to enter (if you are attaching to a stud).
2. A long, thin nail and hammer.
3. A level.
4. A stud-finder
Even if your mechanical skills are primitive you should be able to satisfactorily install this mount. Be sure to get someone to help you lift the TV onto the mount. A "professional" installation of $400-$500 is preposterous since an experienced installer should be able to do the job in less than a half-hour.
The manufacturer's instructions are adequate if uninspired. For this kind of job you would hope for super-clear pictures and directions with no room for misunderstanding, but these are not quite up to that level. The manufacturer could put much clearer pictures -- actual photos -- on a web site. But the instructions were not a great impediment to completing the job.
Remember, the major issue is to locate the center of the stud and place the bolts there. And make sure you do a precise job of checking the mount's level. Do those things and you can save a cool $500 dollars to spend on a new receiver.
By the way, I'm glad I spent a bit more for an adjustable tilt mount instead of mounting the TV flush to the wall.

Click Here to see more reviews about: Sanus System VM200S TV Wall Mount (Silver)

Providing a balance of solid construction and ease of use, the Sanus VisionMount flat panel TV wall mount is ideal for use with virtually any 15-42" inch flat panel TV. Installation is quick & easy and adjusting the tilt and angle of your display is fingertip simple.

Get 41% OFF

Buy cheap Sanus System VM200S TV Wall Mount (Silver) now.

OmniMount UCL-XB Articulating Wall Mount for 42" to 63" Displays (Black) Review

Average Reviews:

(More customer reviews)This mount is heavy and has a lot of strength to support heavy panels. The cable management is much better than competing products that don't even attempt to hide cables. Be careful and take your time - the covers are made of plastic and make break if you try to force them. I would have liked to see metal covers, but with appropriate installation, they work fine and Omnimount may have been trying to keep the weight of the mount down. The cantilever arms are attractive and don't look as utilitarian as a Sanus or Peerless mount. They have a distinct strong and techy look.
Installation took me an hour, but there's no reason to rush the install. A mistake in preparation just makes it take many times longer. I recommend that you make sure you have a good stud finder and then use a finish nail to test the edges of your stud location. You really want to have the lag bolts hit the center of each stud. I used a decent box level and the provided template. The mount base, once lagged onto the wall, is fairly easy. The adapter plate for the plasma attaches easily.
I'd have to say that the hardest part is to have another person able to lift half of 150lbs of plasma tv up to the mount. Thankfully Omnimount has provided a method to rest the adapter on the mount until it can be fastened tightly. I placed a level on top of the plasma after it was mounted and made a tiny adjustment using the adjustment screws to ensure the TV wasn't canted.
So order a pizza, chill the beer, and invite a buddy and make sure you start early enough to watch a game afterward.
Note: many mount instructions show diagrams with the tv screen flat against the floor when installing an adapter on the back... That's not a good idea for a TV that has "this side up" in 17 languages on the box when shipped. Put a blanket on the top edge and lean it against a wall when installing the adapter to the rear of the TV and make sure that you check for depth on your screw holes before chosing the adapter screw.
Lift with your knees ;)

Click Here to see more reviews about: OmniMount UCL-XB Articulating Wall Mount for 42" to 63" Displays (Black)

UCLX-B Color: Black The Wishbone Cantilever arm allows extension and 180lateral rotation for viewing from multiple locations. It is also easy to install thanks to OmniMount's Lift n' Lock system. Features: -Complete assembly of CL-X and UAL Universal Adapter Plate -Mounts to two studs -Fits most screens 42'' to 63'' -Integrated cable management -Extension range: 6.2'' to 28'' -Die cast aluminum construction -200 lbs (68 kg) max weight capacity -Available in platinum or black -Includes complete mounting hardwareUCL-X SpecificationsUCL-X Installation Instructions Need professional installation? Use the Flat Panel Mount Installation Card (for up to 30screens) or the Large Flat Panel Mount Installation Card (for over 30screens)! Give us a call with any questions!

Buy cheap OmniMount UCL-XB Articulating Wall Mount for 42" to 63" Displays (Black) now.

Sanus MT25-B1 Tilting Wall Mount for 26" to 42" Displays Review

Average Reviews:

(More customer reviews)This Sanus tilting wall mount is the smaller version of the non-tilting one I use on my $6,000 50" Fujitsu plasma TV. It has all the ruggedness and strength of its bigger sibling, lots of mounting hardware for both the wall mounting and TV mounting, and provisions for locking the TV to the wall.
Thick, heavy gauge steel that's finished with a nice black paint, a smooth up/down tilt track and positive screw-clutch mechanizm completes the package. Very good straight-ahead instructions are included, too.
There are multiple holes to mate to your TV threads. The two brackets attach independantly to each side of the back of the TV.
Getting the whole thing onto the wall mount is as easy as tilting the TV bottom out, hooking the tops of the brackets over the wall mount, rotating the TV bottom down and flipping the locking tabs in place.
Once you get the wall mount bolted to the wall and the two brackets on the TV, it takes about 30 seconds to get the TV secured to the wall, which is great because you don't want to have to fumble and fool around trying to get "your precious" secured to the wall.
When I was shopping for the 32" Samsung LCD TV that is going onto this mount, I looked at some of the wall mounts they had at the store, and they were pitiful little things by comparison. I headed right home and ordered this one from Amazon.
This is a great medium-size wall mount, highly recommended.

Click Here to see more reviews about: Sanus MT25-B1 Tilting Wall Mount for 26" to 42" Displays

The Sanus MT25-B1 VisionMount is a tilting wall mount for 26" – 42" flat-panel TVs. Sanus Systems’ Virtual Axis™ tilting technology provides easy adjustment of viewing angle with just the gentle touch of a finger. Its powder-coated steel construction offers a sleek, high-tech look while providing strength and durability. TV is positioned less than 2.5" from the wall for a clean, low profile appearance. Universal mounting pattern including VESA 400 x 200 fits virtually any 26" – 42" LCD TV or monitor up to 100 lbs.

Buy cheap Sanus MT25-B1 Tilting Wall Mount for 26" to 42" Displays now.

Sanus VMPL50B VisionMount Tilting Mount For 30"- 56" Displays - Black Review

Average Reviews:

(More customer reviews)I relied heavily on other reviews to make this purchase, so I feel it is necessary that I leave my own. This is a great mount at an excellent price. The product specs on the website say it will fit 30-56 in flat panels. When the product arrived, the box says 30-50 in, so I got worried because I bought it for a 52 in Samsung. After reading other reviews, I decided to try it before sending it back. The mount fit our tv perfectly, and there was plenty of room. I also didn't realize it had a tilt feature, which I didn't think I wanted. It actually came in handy once we had the tv on the wall and were trying to secure it. Another reviewer mentioned having to attach all the connections to the tv before mounting, but with the tilt feature, this is unnecessary. The instructions were easy to follow, and installation was a breeze. I HIGHLY recommend this mount and buying on Amazon!

Click Here to see more reviews about: Sanus VMPL50B VisionMount Tilting Mount For 30"- 56" Displays - Black


VisionMount VMPL50 tilting wall mount features Sanus' Virtual Axis, for smooth tilt with the touch of a finger. Shifts left and right on wall plate for perfect TV placement, even with off-center studs.
A tilting wall mount with Sanus' Virtual Axis, for smooth tilt with the touch of a finger. Click here for a larger image

Get 68% OFF

Buy cheap Sanus VMPL50B VisionMount Tilting Mount For 30"- 56" Displays - Black now.

VideoSecu Tilt TV Wall Mount bracket for Most 32"- 55" LED LCD Plasma Flat Screen TV, MF607B 1QH Review

Average Reviews:

(More customer reviews)I bought the unit and was very skeptical due to the price point. But, I read the online reviews and felt confident enough to buy the unit. I was not disappointed at all. The unit appears to be made of sturdy construction. I thought the unit might be bulky, but it appears to have a profile similar to units costing over $100. The unit was fairly easy and straight forward to install. I am no craftsman, but I have some mechanical skill. If you are a do-it-yourself-er, there is no reason to spend $100 for a more expensive unit that does exactly the same thing. I was also very happy that the unit came with a large variety of screws, bushings, and washers. I did not need to hunt down my own screws or do any make shift adjustments. It bolted up clean straight out of the box. By the way, I used the kit to mount a 50" Panasonic Plasma.

Click Here to see more reviews about: VideoSecu Tilt TV Wall Mount bracket for Most 32"- 55" LED LCD Plasma Flat Screen TV, MF607B 1QH

Perfect choice for mount your flat-panel TV on a wall, with stylish appearance, and it makes TV viewing so much better. This low-profile tilt mount that is designed for most 32"-55" flat-panel TVs weighing up to 165 lbs. VESA compliant for simple installation, supports TV with mounting hole patterns up to 26" horizontally, and 18" vertically (VESA 660X450mm). This commercial grade sturdy and reliable mount come with wide wall plate, it will support two stud installations for studs up to 26" apart. Open wall plate for electrical access, Adjustable forward tilts to provide comfortable viewing when the TV is mounted above eye level or to reduce screen glare. Common wall and TV attachment hardware are included in the box. Make sure you get VideoSecu brand TV wall mount. Report to Amazon if received counterfeit or knock off mount not packed in VideoSecu color box.

Get 72% OFF

Buy cheap VideoSecu Tilt TV Wall Mount bracket for Most 32"- 55" LED LCD Plasma Flat Screen TV, MF607B 1QH now.